Zhejiang Jhenten Machinery Co.,Ltd.
Name:Henson.Zeng
Phone:+86 15957782988
Tel:+86 577-86867777
Email:[email protected]
No.808 Haitong Road, Binhai Development Zone, Wenzhou City
Cartridge Filtration
Multi Fluid Industrial Filter Housing
Model: JTGSF
Brand: JHENTEN
High flow industrial-grade filter
JTGSF Multi Fluid Industrial Filter Housing is precision filter which is specially designed for industrial field , It can be applied to various chemical materials and meet the requirements of different flow.
JTGSF Multi Fluid Industrial Filter is precision filter which is specially designed for industrial field , It can be applied for various chemical materials and meet the requirements of different flow.
The filter housing using side entry & bottom out flow method, it ensure that the material liquid does not overflow when replace cartridge in process.The filter housing can be design to three-stage structure, shell can be opened from top and bottom,the filter can be absolutely disassemble. For the application of some very harsh cleaning,the filter can full angle cleaning.
JTGSF Multi Fluid Industrial Filter Housing use many times polishing process, ensure that the material liquid contact surface roughness Ra≤0.4um,compliance with GMP/FDA requirement , the filter polished is mirror polished. It can be applied in high precision liquid filtration.
Feature
Filter can be made into the form of top and bottom openings, that is convenient to replace the filter, and can achieve thorough cleaning
The filter faceplate can be made into a detachable type, to achieve thorough cleaning
Equipped with two drain vent, respectively in the top of the disk and the bottom of the filter, drain convenient and completely
Side in and bottom out ,this design to ensure that the liquid can be completely drain, at the same time using the tangent export options, making sewage discharge thoroughly, worker is easy to Operating
More than 15 cartridges filter housing can used the design of swing arm + eyebolt or quick-open , easy to Operating, economical and practical
Application
Water Finish: all kinds of water filtration
Food &beverage: wine, mineral water, drinking water filtration
Chemical industry: all kinds of organic solvents, acid, alkali, filtration
Surface Finish
Treatment Type |
Mechanical polishing, |
polishing precision |
Inner surface Ra≤0.6μm , |
Operating Conditions
Max Operating pressure | 0.6MPa、1.0MPa |
Max Operating Temp. | 150℃ |
Material
Filter shell | 304, 316L |
Vent valve , drain valve | 304, 316L |
Eyebolt | 304 |
Stabilizer blade | 304 |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shellconnection | Flange (Eyebolt) |
In-outletN1, N2 | Tri-clamp |
Pressuregauge N3 | 1.5”Tri-clamp |
Ventvalve N4 (optional) |
1/2” Tri-clamp (less than 12pcs) |
Drainvalve N5(optional) | 1” Tri-clamp |
Cartridgesconnection | 222 type, 226 type, DOE type |
Structure
DOE type cartridge
Dimension Parameters | 3pcs(4pcs) | 5pcs(6pcs) | ||||
20” | 30” | 40” | 20” | 30” | 40” | |
A:Total height ( excluding pressure gauge) | 1123 | 1373 | 1623 | 1145 | 1395 | 1645 |
B:The distance from inlet to center | 142 | 165 | ||||
C:Diameter | Φ204 | Φ250 | ||||
D1: The height from inlet N1 to the ground | 540 | 660 | ||||
D2:The height from outlet N2 to the ground | 300 | 300 | ||||
In-outlet N1, N2 dimension | 1.5”/2” | 1.5”/2”/2.5” |
7pcs | 8pcs | ||||
20” | 30” | 40” | 20” | 30” | 40” |
1145 | 1395 | 1645 | 1170 | 1420 | 1670 |
176.5 | 190 | ||||
Φ273 | Φ300 | ||||
660 | 660 | ||||
300 | 300 | ||||
1.5”/2”/2.5” | 1.5”/2”/2.5”/3” |
9pcs(10pcs) | 12pcs(11pcs) | ||||
20” | 30” | 40” | 20” | 30” | 40” |
1170 | 1420 | 1670 | 1170 | 1420 | 1670 |
202.5 | 215 | ||||
Φ325 | Φ350 | ||||
660 | 660 | ||||
300 | 300 | ||||
1.5”/2”/2.5”/3” | 1.5”/2”/2.5”/3” |
The above-mentioned data is the standard, it can customize according tocustomer's requirements
Structure
Dimension Parameters | 3pcs(4pcs/5pcs) | 6pcs | ||||
20” | 30” | 40” | 20” | 30” | 40” | |
A:Total height ( excluding pressure gauge) | 1123 | 1373 | 1623 | 1123 | 1373 | 1623 |
B:The distance from inlet to center | 142 | 149.5 | ||||
C:Diameter | Φ204 | Φ219 | ||||
D1: The height from inlet N1 to the ground | 530 | |||||
D2:The height from outlet N2 to the ground | 300 | 300 | ||||
In-outlet N1, N2 dimension | 1.5”/2” | 1.5”/2”/2.5” |
7pcs(8pcs) | 9pcs | ||||
20” | 30” | 40” | 20” | 30” | 40” |
1163 | 1413 | 1663 | 1170 | 1420 | 1670 |
165 | 176.5 | ||||
Φ250 | Φ273 | ||||
650 | |||||
300 | 300 | ||||
1.5”/2”/2.5” | 1.5”/2”/2.5”/3” |
10pcs(11pcs/12pcs) | ||
20” | 30” | 40” |
1170 | 1420 | 1670 |
190 | ||
Φ300 | ||
650 | ||
300 | ||
1.5”/2”/2.5”/3” |
The above-mentioned data is the standard, it can customize according tocustomer's requirements.
Structure
Dimension Parameters | 15pcs(18pcs) | 21pcs | 24pcs(27/30pcs) |
40” | 40” | 40” | |
A:Total height ( excluding pressure gauge) | 1947 | 1959 | 2026 |
B:The distance from inlet to center | 240 | 265 | 290 |
C:Diameter | Φ400 | Φ450 | Φ500 |
D1: The height from inlet N1 to the ground | 682 | 694 | 714 |
D2:The height from outlet N2 to the ground | 300 | ||
In-outlet N1, N2 dimension | 3”/3.5”/4” |
36pcs | 42pcs | 48pcs(54pcs) |
40” | 40” | 40” |
2036 | 2044 | 2067 |
315 | 340 | 365 |
Φ550 | Φ600 | Φ650 |
729 | 734 | 744 |
300 | ||
3”/3.5”/4” |
56pcs |
40” |
2162 |
390 |
Φ700 |
808 |
350 |
3”/3.5”/4” |
The above-mentioned data is the standard, it can customize according tocustomer's requirements.
Selection Table
| [Qty.of | [Model | [Cartridges | [Shell | [In- | [O-ring] | |
JTGSF | 12R | 20 | S | 4 | K | E | |
| 3R= | 21R= | 20=20” | S=226 type | 4= 304 | K=Tri-clamp | E=EPDM |
| 5R= | 24R= | 30=30” | T=222 type | 6= 316L | F=flange | P=PTFE |
| 7R= | 36R= | 40=40” | D=DOE type |
| L= | V=Viton |
| 8R= | 42R= |
|
|
|
| S=Silicone |
| 9R= | 48R= |
|
|
|
|
|
| 12R= | 56R= |
|
|
|
|
|
| 15R=15pcs |
|
|
|
|
|
|
Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.[email protected], also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)
Other Products
We focus on the sanitary pressure vessels, process tanks and modular system design and manufacture.