Multi Fluid Sanitary Filter Housing

Model: JTGLD

Brand: JHENTEN

Medium & Small Flow Rate Sanitary Filter
JTGLD Multi Fluid Sanitary Filter Housing can meet requirement of medium & small flow rate.

Detail Description

The structure design and manufacture in accordance with the sanitary grade. It's no dead corner, meet " GMP" standard , easy to clean, drain thoroughly, no residual liquid.

For the application of some very harsh cleaning, the filter faceplate made of detachable, full angle cleaning

Feature

The ultra high level of polishing, the inner surface polished to 0.3μm Ra. the outer surface to reach 0.4μm, the absolute hygienic level polishing.
The ultra high level of polishing, the inner surface polished to 0.3μm Ra. the outer surface to reach 0.4μm, the absolute hygienic level polishing.
Small specification filter installation adjusting nut at the bottom of the Stabilizer blade, can adjust the height of the filter, easy to use

Application

Pharmaceutical industry: all kinds of antibiotics and other liquid filtration.
Food and beverage industry: wine , mineral water, drinking water filtration.
Oil industry: oil field water injection filtration
Electronics industry: high purity water filtration
Chemical industry: all kinds of organic solvent, acid, lye filtration.

Surface Finish

Treatment Type	mechanical polishing, electrolytic polishing
Polishing precision	Inner surface Ra≤0.3μm , Outside surface Ra≤0.4μm.

Operating Conditions

Max Operating pressure	0.6MPa、1.0MPa
Max Operating Temp.	150℃
Sterilization	Online or steam sterilization： 121℃/30min

Material

Filter shell	304, 316L
Vent valve, drain valve	304, 316L
Eyebolt	304
Stabilizer blade	304
O-ring	EPDM, PTFE, Viton, Silicone

Connection

Shell connection	Flange ( Eyebolt)
In-outlet N1, N2	quick-open
Pressure gauge N3 (Optional)	1.5" tri-clamp
Vent valve N4 (optional )	1/2" tri-clamp
Drain valve N5 (optional )	1/2" tri-clamp
Cartridges connection	222, 226 (sanitary grade)；
Cartridges connection	DOE (industrial grade)

Structure

Dimension Parameters	3R(4R)				5R(6R)
	10”	20”	30”	40”	10”	20”	30”	40”
A：Total height (excluding pressure gauge)	760	1010	1260	1510	780	1030	1280	1530
B：The distance from inlet to center	160				160
C：Diameter	Φ204				Φ235
D：The height from in-outlet N1, N2 to the ground	200				200
E：The height from drain valve N5 to the ground	130				130
In-outletN1, N2 dimension	1.5”				2”

7R(8R)
10”	20”	30”	40”
805	1055	1305	1555
200
Φ273
200
130
1.5”

The above-mentioned data is the standard, it can customize according tocustomer's requirements.

SelectionTable

	［Qty. of cartridge］	［Model of cartridge］	［Cartridges connection］	［Shell material］	［In-outlet Connection］	［O-ring］
JTGLD	5R	20	S	4	K	E
	3R=3pcs	10=10”Cartridge	S=226 (sanitary grade)	4= 304	K=Tri-clamp	E=EPDM
	5R=5pcs	20=20”Cartridge	T=222 (sanitary grade)	6= 316L		P=PTFE
	7R=7pcs	30=30”Cartridge	D=DOE(industrial grade)			V=Viton
	9R=9pcs	40=40”Cartridge				S=Silicone
	12R=12pcs

Online Enquiry

Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.[email protected], also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)