Zhejiang Jhenten Machinery Co.,Ltd.
Name:Henson.Zeng
Phone:+86 15957782988
Tel:+86 577-86867777
Email:[email protected]
No.808 Haitong Road, Binhai Development Zone, Wenzhou City
Cartridge Filtration
Single Fluid Sanitary Filter Housing
Model: JTGDX
Brand: JHENTEN
JTGDX Single Fluid Sanitary Filter Housing
JTGDX Single Fluid Sanitary Filter is high quality sanitary grade filter which service for small flow rate.
JTGDX Single Fluid Sanitary Filter have good surface treatment and the maximum corrosion-resistant, in order to prevent the bacterial contamination, the unique structure of the sanitary filter housing ensure inside and outside surface have no dead corner and conforms to the requirements of GMP, The filter housing can completely disassemble and washing, easy to operating.
Feature
The high level of Polishing, inner surface≤0.3 um Ra, outside surfce can meet 0.4 um, it is absolute hygienic level polishing
Useing strong Quick-open design, the highest operate pressure up to 1.0MPa
Special vent valve and drain valve: thread sleeve and the tower joint keep separate, the connect hose can not rotate during pressure elease and fluid discharge
The legs of filter useing strengthening screw, not easy to be slided, more durable; the bottom of the legs can option install adjusting screw , can adjust the height of the filter, it is convenient to use.
Application
The pharmaceutical industry: pre filter various antibiotics liquor
Food and beverage industry: alcohol, mineral water, drinking water filtration
oil industry: oil field water injection filter
Electronic Industry: high purity water pre filtration
Chemical Industry: all kinds of organic solvent, acid, lye filter
Surface Finish
Finish Type | Mechanical polishing, Electrolytic polishing, Sand blasting, pickling |
Polishing precision | Inner surface Ra≤0.3μm , Outside surface Ra≤0.4μm. |
Operating Conditions
Max Operating pressure | 0.6MPa、1.0MPa |
Max Operating Temp. | 150℃ |
Disinfect |
Online or steam sterilization: |
Material
Shell | 304, 316L |
Vent valve | 304, 316L |
Quick-open | 304 |
Stabilizer blade | 304 |
O-ring | EPDM, PTFE, Viton, Silicone |
Connection
Shell connection | Tri-Clamp |
In-outlet N1, N2 | Tri-Clamp |
N3Pressure gauge (optional) | 1.5” Tri-clamp |
N4Vent valve (optional) | Φ6 Screw thread |
N5Drain valve (optional) | Φ6 Screw thread |
Cartridges connection | 222型, 226型 |
Structure
Dimension Parameters | 1pc | |||
5” | 10” | 20” | 30” | |
A:Total height | 490 | 615 | 865 | 1115 |
B:The distance from inlet to center | 110 | |||
C:Shell diameter | Φ101.6 | |||
D:N1, N2 The height from in-outlet to ground | 170 |
The above-mentioned data is the standard, it can customize according tocustomer's requirements.
SelectionTable
[Qty. of Cartridge] | [Model of Cartridge] | [Cartridges connection] | [Shell Material] | [In-outlet connection] | [O-ring] | |
JTGDX | 1R | 20 | S | 4 | K | E |
1R=1pc | 5=5” Cartridge | S=226 type | 4= 304 | K= Tri-clamp | E=EPDM | |
10=10” Cartridge | T=222 type | 6= 316L | P=PTFE | |||
20=20” Cartridge | V=Viton | |||||
30=30” Cartridge | S=Silicone |
Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.[email protected], also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)
Other Products
We focus on the sanitary pressure vessels, process tanks and modular system design and manufacture.